Skip to content

Signing in and access

On the sign-in page, select Click here next to "Forgot password?", enter your username or email, and follow the link in the email you receive.

Too many wrong passwords lock the account. Select Click here next to "Forgot password?", enter your username or email, and follow the link in the email you receive.

Check your junk or spam folder, or switch between Email and SMS and select Send again. If it still hasn't arrived, ask your administrator to check the contact details on your account.

Only Administrators can see it. Ask your administrator if you need to change something.

You're probably a Restricted User. Your administrator chooses which meters you can see and the date your access starts.

Meters and readings

Meters are read automatically every reading period, usually every 30 minutes. The home page refreshes itself. For the value right now, use Readings → Current Meter Values.

No reading was received for that time. Common causes are a gateway that was offline (check Gateway Status on the home page), a meter that couldn't be reached, or a manual meter with no reading entered yet.

"Couldn't connect to gateway" means the gateway didn't answer: check it's powered and on the network. "Couldn't read meter" means the gateway answered but the meter didn't. Only meters read over Modbus or M-Bus can be read live; LoRa, imported, manual and virtual meters can't.

Meter Readings shows the meter's running register, like the number on the meter's display. Half-Hourly Consumption and Daily Consumption show how much was used in each period or day.

Open the meter tree with Meters and type part of its name or ID in Search, or filter by Utility first.

On any table with export buttons, select Excel (or CSV). Use column visibility first to hide columns you don't need.

Use Readings → Manual Meter Readings, choose the meter and submit the reading. To correct one, use Edit Manual Meter Readings. If no manual meters are listed, your administrator needs to add them first.

Reports

Reports read a lot of data, so allow up to a minute for long date ranges. The PDF downloads to your browser's usual downloads folder. If nothing appears, check that your browser isn't blocking downloads from the site.

The meter has no readings for the dates you chose. Days with no readings count as zero, so check the meter in a Daily Profile for the same dates.

The building has no floor area. An administrator can add it to the building in Configure Meters.

The report uses the building's opening hours from Set Occupancy Times. If the building has none, it uses the default hours. Ask your administrator to check them.

It estimates how much use could be avoided. On each day with a full set of readings, METERology finds the building's working hours from its usage pattern and assumes use outside them could fall to 20% of what it was. The difference is shown as Potential Savings. Treat it as a guide to where to look, not a guaranteed saving: buildings that run around the clock will always show a high figure.

The always-on part of a building's demand, such as servers, fridges and standby equipment. Baseload is calculated overnight for each meter and day.

Tariffs, costs and carbon

From the tariffs set up in Configure Utilities & Tariffs. Each period's use is multiplied by the rate in force: flat, peak or off-peak, or DUoS red, amber or green band. Carbon is use × the tariff's CO2 per unit.

METERology prices energy use by unit rate. Daily standing charges, VAT and other fixed charges aren't included. Also check the tariff's rates and dates match the contract.

No tariff covers that meter's utility, site and dates. Ask your administrator to add one.

Each day is priced with the tariff in force that day, and reports list each tariff separately.

Alarms

Each alarm group looks at a set number of weeks of history to work out a meter's normal daily use and how much it usually varies. A meter is in alarm when its use stays above or below that range for the set number of days. See which meters are in alarm in Readings → Alarms.

Check that Enable Email Alerts is ticked for the alarm group and your address is in the recipients, and look in your junk folder.

Administration

Check the meter is Enabled, linked to the right gateway, and has the correct slave ID and channel. Then use Current Meter Values to test it: if it reads there, readings will start arriving within the next reading period.

In Configure Users, give them the Restricted User role, choose their visible meters, and set a start date if they shouldn't see earlier data.

Use Configure Data Exporter to create an export: choose the meters, how often and when it runs, and where it goes (a folder, an FTP server or email). This needs to be set up by the METERology team.

Troubleshooting

Force your browser to reload the page (Ctrl+F5 on Windows, Cmd+Shift+R on Mac), or clear the browser's cache.

Yes. Select the menu icon (three lines) at the top to open the menu. Charts are easier to read with the phone turned sideways.

Your organisation's METERology administrator first. For technical support, contact METERology via meterology.co.uk.
No questions match your search.